SS400Kuʻu kila I Kukū.I ʻO ke kila kila, ʻike ʻia hoʻi ʻo ke kila I beam (Universal Beam), he ʻāpana kila lōʻihi me ka ʻāpana keʻa I-like.Hoʻokaʻawale ʻia nā I-beam i nā I-beam maʻamau a me nā kukui I-beam.He ʻāpana kila me ka ʻāpana I-like.Hoʻokaʻawale nui ʻia nā I-beams i nā I-beam maʻamau, nā kukui I-beams a me nā I-beam ākea ākea.E like me ka lākiō kiʻekiʻe o ka flange a me ka pūnaewele, ua māhele ʻia i ka laulā, waena a me ka haiki ākea flange I-beams.Hana ʻia nā mea ʻelua i ka nui 10-60, ʻo ia hoʻi, ʻo ke kiʻekiʻe e pili ana he 10 cm-60 cm.ʻO nā kukui I-beam māmā he mau liʻiliʻi liʻiliʻi, nā pūnaewele lahilahi a me ke kaumaha māmā no ke kiʻekiʻe like.Hōʻike ʻia ʻo I-beam ākea ākea, ʻo ia hoʻi ʻo H-beam, e nā wāwae ʻelua like ʻole a ʻaʻohe piʻi i loko o nā wāwae.No ke kila ʻāpana waiwai a ua ʻōwili ʻia ma luna o ka wili wili honua ʻehā kiʻekiʻe, no laila ua kapa ʻia ʻo ia ʻo "universal I-beam".
| inoa mea kūʻai | SS400Kuʻu kila I Kukū |
| Kūlana | SS400 |
| Mea waiwai | GB:Q235AASTM:A570 GR.AJIS:SS 400 DIN:S235JR |
| ʻenehana | ʻOka wela, ʻōwili anu |
| Hoʻohui Kimia | C:≤0.17%ʻO:≤0.5%Mn: ≤1.4% P:≤0.035% S:≤0.035% |
| Waiwai Mechanical | Ka ikaika hua (MPa)≥:235Ikaika U'i (MPa):340-470Hooloihi %≥:24
|
| Hoʻomanawanui | Manao me ka maʻamau, OD:+/-1%, WT:+/-5% |
| Palapala noi | Hoʻohana nui ʻia i nā kaʻa, nā kaʻa, nā pūnāwai kinoea, nā mīkini hydraulic,nā mīkini kūkulu hale a me ka ʻoihana pahu hau |
| Kūkākūkā uku | 1.FOB 30% T / T, 70% Ma mua o ka hoʻounaʻana 2.CIF 30% Pre-payment , Pono e uku ʻia ke koena ma mua o ka hoʻouna ʻana 3.Irrevocable 100% L / C ma ka ike |
| Nānā ʻaoʻao ʻekolu | SGS, BV, MTC |
| Nā pono | 1.Short manawa hāʻawi2.Quality hōʻoia3.Competitive kumukūʻai, 4.Free Laʻana |
| Manawa Hoʻouna | I loko o 25 mau lā ma hope o ka loaʻa ʻana o ka uku mua |
Hoʻokaʻawale nui ʻia nā I-beams i nā I-beam maʻamau, nā kukui I-beams a me nā I-beam ākea ākea.Hōʻike ʻia ka kikoʻī o ka I-beam e ka helu kenimika o ka laulā pūhaka.No ka laʻana, ʻo ka 10-gauge I-beam he 10cm ka laulā o ka pūhaka.ʻO nā ʻano o nā I-beams he mau I-beam maʻamau i ʻōwili wela ʻia, nā kukui I-beams a me nā kaola I-wāwae ākea ākea (H-beams).ʻO ka laulā pūhaka o ka I-beam maʻamau i'ōwiliʻia he 100 ~ 630mm, i hōʻikeʻia e like me No.10 ~ No.63, aʻo ka slope o ka paiaʻaoʻao i loko o ka wāwae he 1: 6.ʻO ka ʻōnaehana hele no ka ʻōwili I-beams e pili ana i ka ʻōnaehana holo pololei, ʻōnaehana holo skew a me ka ʻōnaehana hui.
1. Ma hope o ka pau ʻana a me ke kaupaona ʻana, hoʻokomo ʻia ka billet i loko o ka umu hele a hoʻomehana ʻia i 1200-1250 ℃.ʻO ka hapa nui o nā kapuahi hele wāwae e hoʻohana i nā kaʻa paheʻe ʻelua insulated a me nā mea puhi kahe axial, hiki ke hāʻawi i ka mana wela maikaʻi loa no nā kikoʻī like ʻole o nā billet a mālama i ka wahie.
2. Ma hope o ka hoʻokuʻu ʻia ʻana o ka billet mai ka umu, e hoʻoneʻe mua ʻia me ka wai kiʻekiʻe 1800MPa, a laila hoʻouna ʻia i ka wili billet no ka ʻōwili ʻana.ʻO ka mīkini bileting ka mea maʻamau he ʻelua-roll reversible rolling mill.Pono e'ōwiliʻia e pili ana i ka 7 a hiki i ka 13 paʻi ma ka mīkini billeting, a laila hoʻounaʻia ka'āpana'ōwili i ka wela wela,ʻo ia wale nō ke kuleana no kaʻokiʻana i nā'āpana i hanaʻoleʻia o ke poʻo a me ka huelo.
3. ʻO ka hope, hoʻouna ʻia ka ʻāpana i ʻōwili ʻia i ka wili roughing honua no ka ʻōwili ʻana.ʻO ka mea maʻamau, hoʻouna ʻia i ka wili hoʻopau honua ma hope o kekahi mau kaʻa, a ʻōwili ʻia no hoʻokahi ala a hoʻokumu ʻia.I kēia manawa, uaʻoki houʻia ke poʻo a me ka huelo, a uaʻokiʻia ka'āpana'ōwili i ka lōʻihi paʻa e like me nā koi kauoha a hoʻounaʻia i kahi moe hoʻomaha no ka hoʻomaha.
He mea maʻamau a māmā paha ka I-beam, ma muli o ke kiʻekiʻe a me ka liʻiliʻi o ka nui o ka ʻāpana, ʻokoʻa ka manawa o ka inertia o nā koʻi nui ʻelua o ka ʻāpana, no laila hiki ke hoʻohana pololei ʻia no ke kulou ʻana i ka mokulele o kāna ʻāpana. pūnaewele puni honua.lālā a i ʻole e hana ʻia i lālā hoʻoikaika ikaika ʻano lattice.ʻAʻole kūpono ia no nā lālā compression axial a i ʻole nā lālā e kū pono ana i ka mokulele o ka pūnaewele a me ke kuʻi ʻana, kahi mea e kaupalena ʻia ai i ke ʻano o ka noi.Hoʻohana nui ʻia nā I-beams i ke kūkulu ʻana a i ʻole nā mea metala ʻē aʻe.
ʻO ka I-beam maʻamau a me ka māmā-duty I-beam he ʻano kiʻekiʻe a haiki i nā ana kea, no laila, ʻokoʻa loa ka manawa o ka inertia o nā koʻi nui ʻelua o ka ʻāpana keʻa, ʻo ia ka mea i kaupalena ʻia i ke ʻano o ka noi. .Pono e koho ʻia ka hoʻohana ʻana i ka I-beam e like me nā koi o nā kiʻi hoʻolālā.
Ma ka hoʻolālā hoʻolālā, pono ke koho ʻana i ka I-beam e pili ana i kona ʻano mechanical, nā waiwai kemika, weldability, ka nui o ka hale, a me nā mea ʻē aʻe e koho i kahi I-beam kūpono no ka hoʻohana.
| Hoʻopili ʻana | Hiki ke hoʻopilikino ʻia nā ʻano mea ʻē aʻe e like me kēlā me kēia koi. |
| ʻO ka hoʻouna ʻana | Hoʻopili ʻia me nā kaula kila paʻa, maʻalahi no ka hoʻouka ʻana a me ka wehe ʻana. |
Q: He mea hana ʻoe?
A: ʻAe, he mea hana paipu kila mākou, He hale hana ponoʻī mākou, aia ma Shandong, Kina.Loaʻa iā mākou ka mana alakaʻi i ka hana ʻana a me ka lawe ʻana aku i nā huahana kila like ʻole.Hoʻohiki mākou ʻo mākou ka mea āu e ʻimi nei.
Q: Hiki iā mākou ke kipa i kāu hale hana?
A: Hoʻokipa maikaʻi ʻia inā loaʻa iā mākou kāu papa manawa e kiʻi mākou iā ʻoe.
Q: Loaʻa iā ʻoe ka mana maikaʻi?
A: ʻAe, hiki iā mākou ke ʻae iā BV, SGS ke kolu o ka nānā ʻana.
Q: Hiki iā ʻoe ke hoʻonohonoho i ka hoʻouna?
A: ʻOiaʻiʻo, loaʻa iā mākou ka mea lawe ukana mau loa e hiki ke loaʻa ke kumukūʻai maikaʻi loa mai ka hapa nui o nā hui moku a hāʻawi i ka lawelawe ʻoihana.
Q: Pehea ka lōʻihi o kāu manawa hoʻouna?
A: ʻO ka maʻamau he 7-14 mau lā inā loaʻa nā waiwai.a i ʻole he 25-35 mau lā inā ʻaʻole i loaʻa nā waiwai, e like me ka nui.
Q: Pehea e hiki ai iā mākou ke loaʻa ka hāʻawi?
A: E ʻoluʻolu e hāʻawi i ka kikoʻī o ka huahana, e like me ka mea, ka nui, ke ʻano, etc. No laila hiki iā mākou ke hāʻawi i ka makana maikaʻi loa.
Q: Hiki iā mākou ke loaʻa i kekahi mau laʻana?
A:ʻAe, hiki iāʻoe ke loaʻa nā hōʻailona i loaʻa i kā mākou waihona.
Q: Pehea ʻoe e hana ai i kā mākou ʻoihana i ka wā lōʻihi a me ka pilina maikaʻi?
A: 1. Mālama mākou i ka maikaʻi maikaʻi a me ke kumukūʻai hoʻokūkū e hōʻoia i ka pōmaikaʻi o kā mākou mea kūʻai.
2. Ke mahalo nei mākou i kēlā me kēia mea kūʻai aku ma ke ʻano he hoaaloha a ʻoiaʻiʻo mākou e hana i ka ʻoihana a hana i nā hoaaloha me lākou, no hea mai lākou.
